Electro-permanent lifting magnet EPMM 200 – 5000
Mains-powered electro-permanent lifting magnets for flat material up to 5,000 kg – very short switching times for frequently changing workpieces.
- Lifting capacity
- 200 – 5,000 kg
- Power supply
- 230 V / 400 V
- Application
- Flat material
- Safety factor
- 3:1
Description
Thanks to their very short switching times, the EPMM electro-permanent lifting magnets are used wherever workpieces change frequently. Depending on the model, only a 230 V or 400 V mains supply is needed, and the magnets are then immediately ready for use.
Electrical pulses lasting only seconds switch the EPMM on automatically or manually at the push of a button. No current flows during load transport, yet the workpiece is held as securely as with a permanent lifting magnet. The EPMM can be used individually or on magnetic lifting beams and is a practical option for three-shift operation. With the inching function, even stacked sheets from 4 mm thickness can be separated.
Thanks to pulse-current control, the EPMM lifting magnets use very little energy, which reduces operating costs and saves time.
The pick-up mechanism, which works almost like a remote control, makes the EPMM particularly efficient: the magnet switches on automatically as soon as the crane chain is fully relieved, with a magnetic sensor near the lifting eye acting as a proximity switch that triggers the switching pulse (ON/OFF pick-up mechanism). This saves work steps and therefore costs.
If automatic operation is not wanted, the magnets can also be switched directly on the device or with an optional remote control. Special pole shoes for transporting round workpieces can be made on request.
Models from EPMM 2000 upwards are equipped with a 360° visible LED status indicator that clearly shows whether the magnet is magnetised (green) or demagnetised (red).
Advantages
- 4 power levels for picking up even thin sheets
- ADPREM function prevents accidental switching in the air
- No current flows during lifting (only an electrical pulse of a few seconds is needed to magnetise or demagnetise)
- Switched manually via push button or automatically via the pick-up mechanism
- Ideal for clearing cutting systems, but also for lifting series parts
- Optional: positioning drawbar, swivelling ±60° in the Z axis
Technical data
| Model | Dimensions L x W x H [mm] | Flat load SWL 3:1, Fh [kg] | Min. thickness [mm] |
|---|---|---|---|
| EPMM 200 | 150 x 85 x 150 | 200 | 4 |
| EPMM 500 | 180 x 160 x 140 | 500 | 4 |
| EPMM 1000 | 355 x 165 x 170 | 1,000 | 4 |
| EPMM 2500 | 590 x 230 x 155 | 2,500 | 6 |
| EPMM 4000 | 860 x 230 x 165 | 4,000 | 6 |
| EPMM 5000 | 1,000 x 280 x 165 | 5,000 | 6 |
Videos
Get to know the EPMM 200 – 5000 up close in action.
The video loads from YouTube (privacy-enhanced mode) only when you start it.