Electro-permanent lifting magnet EPMH 5 – 30
Mains-powered electro-permanent lifting magnets for slabs and unmachined blocks up to 30,000 kg – even with large air gaps or heavily scaled surfaces.
1 / 4
- Lifting capacity
- 5,000 – 30,000 kg
- Power supply
- 400 V
- Application
- Flat material
- Safety factor
- 3:1
Description
The EPMH series electro-permanent lifting magnets are designed for lifting and transporting individual slabs and unmachined blocks. They handle loads with a large air gap or a scaled surface.
All that is needed is a 400 V mains supply – the magnets are then immediately ready for use.
The EPMH is switched by short current pulses, either manually with a push button on the device or with an optional remote control. No current flows during load transport, yet the workpiece is held as securely as with a permanent lifting magnet.
Thanks to pulse-current control, the EPMH lifting magnets use very little energy, which reduces operating costs and saves time.
Advantages
- Bridges large air gaps
- Integrated control with signal lamps and acoustic warning
- ADPREM function prevents accidental switching in the air
- No current flows during lifting (only a short electrical pulse is needed to magnetise or demagnetise)
- Switched manually via push buttons or with an optional remote control
Technical data
| Model | Dimensions Ø x H [mm] | Flat load SWL 3:1, Fh [kg] | Min. thickness [mm] |
|---|---|---|---|
| EPMH 5 | 650 x 650 | 5,000 | 30 |
| EPMH 10 | 880 x 531 | 10,000 | 30 |
| EPMH 15 | 860 x 563 | 15,000 | 40 |
| EPMH 20 | 980 x 577 | 20,000 | 40 |
| EPMH 25 | 1100 x 637 | 25,000 | 80 |
| EPMH 30 | 1147 x 625 | 30,000 | 80 |
Videos
Get to know the EPMH 5 – 30 up close in action.
The video loads from YouTube (privacy-enhanced mode) only when you start it.
