Assfalg

Electro-permanent lifting magnet EPMM 200 – 5000

Mains-powered electro-permanent lifting magnets for flat material up to 5,000 kg – very short switching times for frequently changing workpieces.

Lifting capacity
200 – 5,000 kg
Power supply
230 V / 400 V
Application
Flat material
Safety factor
3:1

Description

Thanks to their very short switching times, the EPMM electro-permanent lifting magnets are used wherever workpieces change frequently. Depending on the model, only a 230 V or 400 V mains supply is needed, and the magnets are then immediately ready for use.

Electrical pulses lasting only seconds switch the EPMM on automatically or manually at the push of a button. No current flows during load transport, yet the workpiece is held as securely as with a permanent lifting magnet. The EPMM can be used individually or on magnetic lifting beams and is a practical option for three-shift operation. With the inching function, even stacked sheets from 4 mm thickness can be separated.

Thanks to pulse-current control, the EPMM lifting magnets use very little energy, which reduces operating costs and saves time.

The pick-up mechanism, which works almost like a remote control, makes the EPMM particularly efficient: the magnet switches on automatically as soon as the crane chain is fully relieved, with a magnetic sensor near the lifting eye acting as a proximity switch that triggers the switching pulse (ON/OFF pick-up mechanism). This saves work steps and therefore costs.

If automatic operation is not wanted, the magnets can also be switched directly on the device or with an optional remote control. Special pole shoes for transporting round workpieces can be made on request.

Models from EPMM 2000 upwards are equipped with a 360° visible LED status indicator that clearly shows whether the magnet is magnetised (green) or demagnetised (red).

Advantages

  • 4 power levels for picking up even thin sheets
  • ADPREM function prevents accidental switching in the air
  • No current flows during lifting (only an electrical pulse of a few seconds is needed to magnetise or demagnetise)
  • Switched manually via push button or automatically via the pick-up mechanism
  • Ideal for clearing cutting systems, but also for lifting series parts
  • Optional: positioning drawbar, swivelling ±60° in the Z axis

Downloads

Technical data

Model Dimensions L x W x H [mm] Flat load SWL 3:1, Fh [kg] Min. thickness [mm]
EPMM 200 150 x 85 x 150 200 4
EPMM 500 180 x 160 x 140 500 4
EPMM 1000 355 x 165 x 170 1,000 4
EPMM 2500 590 x 230 x 155 2,500 6
EPMM 4000 860 x 230 x 165 4,000 6
EPMM 5000 1,000 x 280 x 165 5,000 6

Videos

Get to know the EPMM 200 – 5000 up close in action.

The video loads from YouTube (privacy-enhanced mode) only when you start it.

Ready to experience the difference?

Take the next step: tell us about your part, machine and process, and we will prepare the right solution and your quote.

or simply give us a call

+90 224 544 86 67

Product: Electro-permanent lifting magnet EPMM 200 – 5000

PDF, JPG or PNG, up to 8 MB.

We use your details only to answer your request.

      Back to top