Permanent magnetic chuck Permamax
Very strong permanent magnetic chuck with a wide parallel pole pitch for heavy-duty milling and grinding – best suited to thick and large workpieces.
1 / 4
- Sizes
- 160 x 100 – 600 x 300 mm
- Holding force
- approx. 140 N/cm²
- Pole division
- Parallel pole 12 + 3 mm
- Application
- Milling, grinding
Description
Permamax permanent magnetic chucks are designed for heavy-duty machining and can be used for milling, drilling, grinding and cutting. They still achieve considerable holding forces on uneven and rough surfaces. They allow universal clamping of small, medium and large workpieces of any thickness, but are best suited to thick and large workpieces.
A continuous, wide transverse pole distribution (steel/brass) ensures a consistently high holding force over the entire width, right up to the long sides. The chucks are activated with a hexagonal switch lever.
Advantages
- Low overall height with very high holding force
- The clamping surface can be machined to a maximum depth of 8 mm
- Workpieces can be clamped quickly
- 10 mm penetration depth of the magnetic force
- Smooth on/off switching via the switch lever
Technical data
| Model | A [mm] | B [mm] | C [mm] | D [mm] | E [mm] | F [mm] | G [mm] |
|---|---|---|---|---|---|---|---|
| PM 1610 | 160 | 100 | 53 | 14 | 12 | 8 | 60 |
| PM 2515 | 250 | 150 | 53 | 14 | 12 | 8 | 90 |
| PM 3015 | 300 | 150 | 53 | 14 | 12 | 8 | 90 |
| PM 3020 | 300 | 200 | 53 | 14 | 12 | 8 | 120 |
| PM 4020 | 400 | 200 | 53 | 14 | 12 | 8 | 120 |
| PM 6020 | 600 | 200 | 53 | 14 | 12 | 8 | 120 |
| PM 5030 | 500 | 300 | 53 | 14 | 12 | 8 | 190 |
| PM 6030 | 600 | 300 | 53 | 14 | 12 | 8 | 190 |
Videos
Get to know the Permamax up close in action.
The video loads from YouTube (privacy-enhanced mode) only when you start it.
