Control units EPM D50 / D100 for electro-permanent magnetic chucks
Electronic polarity-reversing control units that switch electro-permanent magnetic chucks and modules on and off and regulate the holding force in several stages via the hand-held control.
1 / 4
- Voltage
- 400 V
- Channels
- 1 – 4
- Compatible with
- Magnaslot, Doublemag, Triplemag, EPRadial, EPFlux
- Operation
- Remote control with holding force regulation
Description
The electronic polarity-reversing control units are used to switch the magnetic chucks on and off and to regulate the holding force in several stages via the associated hand-held control unit.
D50 control units can switch up to 100 poles of 50 x 50 mm or 50 poles of 75 x 75 mm; beyond that, the D100 control unit is required.
The single-channel units D50 and D100 are used to control Magnaslot and Doublemag.
The D50-2 control unit is required to operate the Triplemag magnetic modules with their additional holding surface.
If several magnetic chucks are to be controlled individually, the D100-4 control unit must be used; it can switch up to four chucks separately.
Customer-specific requirements can be implemented on request.
Technical data
| Model | Magnetic chuck | Channels | Features |
|---|---|---|---|
| EPM D50 (max. 50 A) | Magnaslot, Doublemag | 1 | With remote control and holding force regulation |
| EPM D50Flux | EPFlux | 1 | With remote control and holding force regulation |
| EPM D50-2 (max. 50 A) | Triplemag | 2 | With remote control and holding force regulation |
| EPM D100 (max. 100 A) | Magnaslot, EPRadial | 1 | With remote control and holding force regulation |
| EPM D100-4 (max. 100 A) | Magnaslot | 4 | With remote control and holding force regulation |
| Foot switch | For EPM D50 control unit (Doublemag) | - | - |
