Permanent lifting magnet TP 150 / TP 300
Manually operated permanent lifting magnet for flat material from 5 mm thickness and square tubes – lifting capacity 200 kg or 400 kg.
1 / 3
- Lifting capacity
- 200 / 400 kg
- Min. material thickness
- 5 mm
- Application
- Flat material
- Safety factor
- 3:1
Description
The key advantages of the TP lifting magnets are economy and fast handling. This hand-operated permanent lifting magnet is a fully developed solution for moving all ferromagnetic materials efficiently, safely and reliably.
It lifts and transports a wide variety of flat workpieces, from pre-machined parts to square tubes. Two TP models are available, with lifting capacities of 200 kg and 400 kg, for different material thicknesses. The TP has become an indispensable aid for transporting flat material from 5 mm thickness and square tubes.
Advantages
- Absolutely safe lifting: the pull-off force is 3 times the recommended lifting capacity
- For flat material from 5 mm thickness
- No damage to the workpiece surface
- Smooth ON/OFF switching via the switch lever
- The switch lever does not spring back
- Single-hand operation via switch lever with integrated safety lock
- Easy suspension from a crane
Technical data
| Model | A [mm] | B [mm] | C [mm] | D [mm] | E [mm] | F [mm] | Flat load SWL 3:1, Fh [kg] |
|---|---|---|---|---|---|---|---|
| TP 150 | 202 | 150 | 181 | 100 | 126 | 74 | 75/150/200 |
| TP 300 | 352 | 300 | 181 | 100 | 126 | 74 | 150/300/400 |
The three load values apply to minimum material thicknesses of 5, 8 and 10 mm respectively.
