Battery-powered lifting magnet SB200 / SB500 / SB950

The SB electro-permanent battery lifting magnets cover the 200 kg, 500 kg and 950 kg load range for flat material. Round material can be lifted up to 50 kg, 200 kg and 400 kg respectively.

They combine the advantages of permanent lifting magnets with those of electro lifting magnets. Electrical pulses lasting only seconds switch the SB200, SB500 and SB950 automatically or manually at the push of a button. Although no current flows during load transport, the workpiece is held as securely as with a permanent lifting magnet.

Approximately 1,000 ON/OFF switching cycles are possible before the integrated batteries need recharging via a simple mains connection. The magnets can be used individually or on magnetic lifting beams and are a practical option for three-shift operation.

The automatic mode allows contactless switching: the magnet switches on or off each time it is set down and the crane eye is relieved, so there is no need to bend down or climb onto machine tables. Together with the optional positioning drawbar, workpieces can be picked up, guided and set down precisely.

• No current flows during lifting (only an electrical pulse of a few seconds is needed to magnetise or demagnetise)
• Switched manually via push button or automatically via the pick-up mechanism
• 3 power levels for lifting material from 4 mm thickness
• Visual and acoustic warnings for the battery charge level
• Optional: SB950 positioning drawbar, swivelling ±60° in the Z axis

• Data sheet (EN) (PDF, opens in a new tab)
• Questionnaire (EN) (PDF, opens in a new tab)