Assfalg
Bevelling machine A330
Automatic edge milling machine for precise machining of top or bottom edges at angles from 0° to ±60°, with chamfer widths up to 70 mm.
1 / 3
- Chamfer width
- 0 – 70 mm
- Chamfer angle
- 0° – ±60°
- Machined edge
- Top or bottom edge
- Motor power
- 4.9 kW
Description
The automatic A330 edge milling machine is used for precise machining of the top or bottom edges of small to large workpieces.
Thanks to its 180° turning device, the angle can be adjusted between 0° and ±60°.
Its robust design makes the machine suitable for a wide range of materials, and it achieves surface finishes of Ra 3.2 to 6.3.
The infinitely variable speed and feed control also maximises tool life.
Advantages
- Very good tool life and cutting performance, even with stainless steel
- Continuously variable automatic feed control: 0 – 1.5 m/min
- Automatic workpiece clamping
- Spring-mounted swivel castors to compensate for uneven floors
- Digital speed and feed rate display
- Swivelling, ergonomic operating display
- Working height 740 – 840 mm
Technical data
| Model | Motor power [kW] | Speed [rpm] | Power supply | Max. chamfer width [mm] |
|---|---|---|---|---|
| A330 | 4.9 | 500 – 1050 | 400 V, 50/60 Hz | 0 – 70 |
Videos
Get to know the A330 up close in action.
The video loads from YouTube (privacy-enhanced mode) only when you start it.
