Automatic magnetic holder AEM-1 | AEM-2 | AEM-3
Practical aid for gripping, lifting and carrying steel workpieces ergonomically. A push mechanism switches the magnetic holding on and off with a single movement.
- Magnetic holding force (not a lifting capacity)
- 8 – 20 kg
- Full saturation thickness
- 4 – 5 mm
- Weight
- 0.28 – 0.99 kg
- Operation
- Push mechanism
Description
The AEM automatic magnetic holders are practical aids for gripping, lifting and carrying steel workpieces ergonomically. A push mechanism switches the magnetic holding on and off with a single movement.
The holder is activated by placing it on the workpiece and pressing it down. After the workpiece has been set down on the support surface, pressing down again deactivates the magnetic holding.
On the AEM-2 and AEM-3, the extension is attached with a screw connection and can easily be removed and refitted, so the holder can be used in a short or long version depending on the application.
The stated magnetic force is a holding force, not a lifting capacity. The holding force depends on the material, its thickness and the contact surface; the manufacturer's capacity data and operating instructions must be observed.
Advantages
- Push to activate: holds as soon as it is placed on the workpiece and pressed down
- Push again to release: magnetic holding is switched off after the workpiece has been set down
- Removable extension with screw connection for short or long use
- Ergonomic handling of steel workpieces
Technical data
| Model | Dimensions, short [mm] | Dimensions with extension [mm] | Magnetic holding force* [kg] | Full saturation thickness [mm] | Weight [kg] |
|---|---|---|---|---|---|
| AEM-1 | 40.5 × 160 | – | 8 | 4 | 0.28 |
| AEM-2 | 105 × 266 × 40.5 | 105 × 543 × 40.5 | 8 | 4 | 0.64 |
| AEM-3 | 105 × 300 × 55 | 105 × 599 × 55 | 20 | 5 | 0.99 |
* The stated magnetic force is not a lifting capacity.