Electro-permanent magnetic chuck EPFlux
Electro-permanent magnetic chuck for precision grinding, including hardened and high-alloy workpieces – practically no residual magnetism and no heating of the chuck.
1 / 2
- Sizes
- 450 x 150 – 1,500 x 600 mm
- Holding force
- approx. 100 N/cm²
- Pole division
- Parallel
- Application
- Grinding
Description
The EPFlux magnetic chuck has no remanence (residual magnetism) after switching off, so high-alloy and hardened workpieces can be released easily from the chuck. The highest grinding precision is achieved because the chuck does not heat up – and without heating there is no expansion or deformation of the workpieces being machined.
This electro-permanent magnetic chuck is the ideal chuck for precision grinding machines. The laminated surface of brass and steel and the solid steel body ensure magnetic holding force as well as exceptional hardness over the entire surface.
Large and small workpieces can be clamped evenly on the EPFlux. Magnetising and demagnetising take place within seconds by a short current pulse.
Advantages
- Low overall height with very high holding force
- Machining of hardened and high-alloy workpieces
- No residual magnetism
- No heating of the magnetic chuck
- Holding force 100 N/cm²
Technical data
| Model | Dimensions L x W x H [mm] |
|---|---|
| EPFlux 4515 | 450 x 150 x 65 |
| EPFlux 5020 | 500 x 200 x 65 |
| EPFlux 6030 | 600 x 300 x 65 |
| EPFlux 8040 | 800 x 400 x 65 |
| EPFlux 10050 | 1,000 x 500 x 65 |
| EPFlux 15060 | 1,500 x 600 x 65 |
