PERMAMAX MICROFINE
Mechanical Magnetic Tables
Permamax - Permanent Magnetic Crimping Table
Permamax is an extremely powerful permament magnetic clamping table that can be used manually. It can be used universally on all machine tools.
Areas of Use :
- Universally applicable, especially for small (starting from 30 x 15 x 6 mm) large workpieces in milling processes
- All ferromagnetic thin and thick parts starting from 0.8 mm thickness
Features:
- Ergonomic design and high clamping power.
- Max. clamping force on the applied surface. 8 mm depth machining
- Mechanical on/off feature
- The workpiece is quickly clamped and released
- 5 axis machining by connecting in one axis
- Low magnetic (average 10 mm) penetration depth in flat magnetic field
- Clamping force 140 N/cm2 pole spacing 12 + 3 mm
The Ace for Metal
Solutions and tools for stationary and
mobile metalworking.
Permamax - Cylindrical Permanent Crimping Table
Permamax is a permanent magnet clamping table with very strong parallel pole spacing. For universal ferromagnetic workpieces, it is particularly suitable for small and disk-shaped parts.
Areas of Use :
- It can be used universally, especially for small workpieces in milling processes.
- Ideal for stock removal on flat surfaces, internal curve stock removal, turning and hard turning.
Features:
- Ergonomic design and high clamping power.
- Max. clamping force on the applied surface. 8 mm depth machining (5 mm fineness D < 130 mm
- Sealing against liquid permeability.
- Mechanical on/off feature
- Workpieces are tightened quickly and without tension.
- Clamping is applied in one axis only, enabling all-round machining.
- Low magnetic (average 10 mm) penetration depth in flat mechanical field.
- Clamping force 140 N/cm2 1243 mm pole spacing.
The Ace for Metal
Solutions and tools for stationary and
mobile metalworking.
Microfine - Permanent Magnetic Crimping Table
The Microfine permanent magnetic squeezing table is extremely economical and can be manually switched on/off. With a very uniform magnetic field, this table is ideal for light to medium duty machine tools.
Areas of Use :
- Universally usable, ideal for light milling, especially for polishing, abrasive and sanding operations.
- For small thin machining parts with a flat and clean surface.
Features:
- maximum clamping power in small form.
- Max. clamping force on the applied surface. 8 mm depth machining
- Sealing against liquid permeability.
- Mechanical on/off feature
- The workpiece is quickly squeezed out
- 5-axis machining capability by connecting in one axis
- Low magnetic penetration depth due to small pole spacing in flat magnetic field
- Clamping force 80 N/cm2 pole spacing 1.5 + 0.5 mm
The Ace for Metal
Solutions and tools for stationary and
mobile metalworking.
Neostar - Cylindrical Permanent Crimping Table
Neostar is a permannt magnet clamping table with very strong radial pole spacing. for ferromagnetic workpieces with universal symmetrical rotation, especially for large round ring and disk-shaped parts up to 80 mm. It is used by placing it in the central central access hole.
Areas of Use :
- Universally applicable, especially suitable for internal grinding, turning and hard turning.
- Highly suitable for clamping circular parts.
Specifications:
- average ergonic design and high clamping force.
- Sealing against liquid permeability
- Mechanical on/off feature
- The central point is non-magnetic and C max. direct transition can be made according to the size
- Fast and tension-free clamping of workpieces
- Clamping is applied in only one axis, enabling all-directional machining
- Application can be made by descending into the center passage hole
- Low magnetic (average 10 mm) penetration depth in flat magnetic field
- Clamping force 140 N/cm2
The Ace for Metal
Solutions and tools for stationary and
mobile metalworking.
Microsine - Permanent Magnetic Crimping Table
The magnetic sine table is an auxiliary equipment for angle milling, grinding and especially for tool making. It is available in two different versions, longitudinal only or with double shaft transverse and longitudinal on axis. Mechanical sine tables can optionally be equipped with magnetic mirrors.
Areas of Use :
- It can be used universally. Especially suitable for light and medium milling and grinding operations
- Small-thin and large-thick materials with a clean and flat surface
Features:
-
- Sealing against liquid permeability
- The sinus table is equipped with micro-sensitive magnetic jaws as standard
- The penetration depth of the magnetic force is low due to the flat magnetic field
- Max. clamping force applied to the surface. 8 mm depth machining
- Fast and angled clamping without stressing the material to be processed
- Final angular dimensions can be precisely adjusted to the sine table
- All-directional processing by magnetically tightening only one face
- Clamping force 80 N/cm2 pole spacing 1.5 + 0.5 mm
- Rotation range 0 – 60°
- Surface hardened
The Ace for Metal
Solutions and tools for stationary and
mobile metalworking.
Our Customer Representative is Waiting to Serve You
We are here to help your company, your customers and your employees.